MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 40. Z-Slide
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sun 02 August 2009, 15:56
lumberjack_jeff
Just call me: Jeff #31
 
Montesano, WA
United States of America
simple, albeit stupid question.

I have a part which is tapped M6. The bolts I have are 1/4-20

M6 is .236" dia

Is it possible/advisable to retap the 6mm holes to suit my bolts?

I would prefer not ordering new bolts, but I especially don't want to mess up my part. If I had an M6 tap, I could just do some experimentation on some scrap. Sadly, I don't.

My gut feel is to order new bolts, but I want to check with the brain trust first.
Reply With Quote
  #2  
Old Sun 02 August 2009, 16:06
servant74
Just call me: Jack
 
Nashville (Tennessee)
United States of America
Personally, I would go with your gut and order new bolts. I don't think there is enough 'meat' left to re-tap and get full depth threads. But someone with more knowledge than I must answer that question for sure.
Reply With Quote
  #3  
Old Sun 02 August 2009, 16:49
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
The drill size is almost exact (.1mm off), it's the pitch, that's not close enough, 20 tpi compared to 1.0 = 25.4 tpi
Reply With Quote
  #4  
Old Sun 02 August 2009, 23:50
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
You could get away with re-tapping, if the holes are deep and a lot of threads will be engaged, and the material is steel and not alu., but it is still not a nice thing to do.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Blower Question MetalHead 55. Dust Management 3 Thu 13 August 2009 12:12
Amperage question shelbygt500buddy 702. Power Supplies 2 Thu 09 July 2009 10:32
A very simple sanding device gixi Miscellaneous / General / Whatever / Catchall 2 Mon 29 June 2009 07:14
G-Simple (free) Gerald D CAM 0 Wed 02 April 2008 12:44
Programming a simple pushbutton control station for ShopBot Mike John Human Interface Devices (HID's) 25 Fri 11 January 2008 10:47


All times are GMT -6. The time now is 09:19.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.