MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Miscellaneous hardware and software > Test Area for this forum
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sat 19 May 2007, 09:47
Admin
Just call me: Mike
 
Alabama
United States of America
Big Problems

List your big problems here please:

I'll start with some:

1. About, 5% of the posts didn't come over from the old board - look at Donald's laser cut thread to see what the interim solution is..

2. Many links are broken, photos are missing - see Fabrica's thread.

Lot's of fixing still lies ahead, but I think we are okay for a shaky start
Reply With Quote
  #2  
Old Sat 19 May 2007, 12:25
Admin
Just call me: Mike
 
Alabama
United States of America
I have had a couple of guys saying that this board does not recognize their usernames/passwords from the old board. THAT's GOOD!

Passwords are scrambled by the boards and I can't get a simple list to hand from the one software to the other. As I mentioned before, you will have re-register here.
Reply With Quote
  #3  
Old Sat 19 May 2007, 16:20
Bob Cole
Just call me: Bob
 
Berlin Center, Ohio
United States of America
Inverted posting order

Gerald:

i have been trying some different options with how to get the threads to display from oldest to most recent {at the bottom]..
I think if you chose to display the threads from the choices in the upper right "display modes" box, choose "switch to hybrid mode", and it should display like the old forum.
Reply With Quote
  #4  
Old Sat 19 May 2007, 19:49
soulvoid
Just call me: Håvard
 
Stavanger
Norway
SOme chars and html tags did not come over correctly, € and color and strike tags it seems like in the cable and wiring.
Reply With Quote
  #5  
Old Sat 19 May 2007, 23:07
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
This board has a "search & replace" facility that I will be trying to fix some of the characters. This should be easy for the badly screwed up characters, but I cannot auto-fix cases where the apostrophe has been replaced by just the letter "b"
Reply With Quote
  #6  
Old Sun 20 May 2007, 14:23
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Tagpro supplies RFID antenna comb for wheelie bin lifts

Last edited by Gerald D; Fri 11 September 2015 at 05:47..
Reply With Quote
  #7  
Old Sun 20 May 2007, 17:48
Bill McGuire
Just call me: Bill
 
Weiser, Idaho
United States of America
It will probably take me a couple of days to get used to this new format, but I am pretty much used to waking up in a new world every day already.
I'm actually just posting to see if my thoughts will upload.
Looks great to me, Gerald! Even the blue shading looks the same.
(It was blue, before, wasn't it?)
Reply With Quote
  #8  
Old Tue 22 May 2007, 08:33
Alan_c
Just call me: Alan (#11)
 
Grabouw (Western Cape)
South Africa
Send a message via Skype™ to Alan_c
Mass Subscription / Notification

Is there any way one could subscribe/be notified for all posts/threads short of going to each and every thread and subscribing (waaay too much effort) I had a look at UserCP but could not find what i was looking for?
Reply With Quote
  #9  
Old Tue 22 May 2007, 09:38
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Alan, welcome back.

Alas, I was thinking that vB had subscription at Forum topic level, but it would appear for now that it is at the thread level only. Even if you do laboriously subscribe to each thread, you will miss the new threads. I used to use the mass subscribe, but now I will have to find something else . . . . . .
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 16:24.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.