Laser Cut and Bent Parts - United States - Page 6

MetalHead · #**151** Wed 20 January 2010, 16:04

I'll PM you

Pauld · #**152** Tue 26 January 2010, 15:20

Mike thanks for the reply I'm sure these have been asked before but i still have questions about laser cut parts. Do the laser cut parts come with marks for drilling all the holes or are they done by the laser also the slots same question. the plans do not have measurements for the hole locations that i can find (maybe I've missed something)anyway!! Thanks for your help and to all the others on the site for all the great info. I'm hoping one day i can build me one.
WOW What A Machine.

sailfl · #**153** Tue 26 January 2010, 15:37

Pauld,

If you have not downloaded and printed out the drawings that Gerald has provided you need to do that. You can also look at the drawings. I don't mean to be rude. Part of building the MechMate is to do some of the leg work.

We are happy to answer all your questions, but put the work in also.

Yes the lasered parts come with markings to help you drill the holes.

I think we need to build a MechMate Robot and send her with each of the builds to assist every one. Fetch the 12 mm bolts and bring me a drink.

KenC · #**154** Tue 26 January 2010, 22:26

Quote:

Originally Posted by sailfl

I think we need to build a MechMate Robot and send her with each of the builds to assist every one. Fetch the 12 mm bolts and bring me a drink.

That would be a great treat ! LOL

MetalHead · #**155** Wed 27 January 2010, 05:35

http://www.mechmate.com/forums/showt...8&postcount=19

The spider has etched locators to help align the V-Rollers, but the rest of the parts mostly have precut holes. The drawings and common sense (which aint so common by the way

) do the rest.

The whole Y-car assembly literally snaps together. It is actually difficult to take apart it fits together so well. A very nice design and very ridged after it is welded. This site even covers what steps to weld the Y car.

So reading here is a must. I say this site is the assembly manual for the MechMate. By how it is layed out you can pick the area you want to study off the main forum page and read all the feedback on that section.

I'd say 99.9 percent of the time if you have a question about building the MechMate it is in this forum somewhere. If you can't find it after truly looking for it (We will know

) then just ask. Someone can point you in the right direction.

Even after over a year I still read here daily and study the drawings a lot. But the best thing to do is dive in.

MetalHead · #**156** Wed 27 January 2010, 05:52

Update on Parts - The parts are heading over to the bender this week. So I am on track to have them back early next week. I will let everyone know when they are ready.

firechief · #**157** Thu 28 January 2010, 20:56

How much for your parts kit. looking to start soon

zip code 49014
tim@pennfieldtwp.com

Thanks

MetalHead · #**158** Thu 28 January 2010, 21:37

Sent you a PM

firechief · #**159** Fri 29 January 2010, 07:01

Thanks for the PM
price looks great and will be starting soon

Tim

JamesJ · #**160** Fri 29 January 2010, 16:46

How much for your parts kit? Thanks.

MetalHead · #**161** Sat 30 January 2010, 03:31

I'll PM you

podunk · #**162** Tue 02 February 2010, 23:07

Looking for a price. Zip 95355

Tokamak · #**163** Wed 03 February 2010, 06:58

Looking for a price on the laser parts, Thanks John

Zip 91016

MetalHead · #**164** Wed 03 February 2010, 12:13

I PM'd you

MetalHead · #**165** Wed 03 February 2010, 12:16

podunk - I also PM'd you

daoneua · #**166** Thu 04 February 2010, 12:56

MetalHead please PM me with the price too 97007.

Potter · #**167** Thu 04 February 2010, 13:21

How much for your parts kit. looking to start soon.

Zip code is 72442

MetalHead · #**168** Thu 04 February 2010, 22:32

Daoneua and Potter I PM'd you both.

MetalHead · #**169** Fri 12 February 2010, 07:14

I still have 4 sets of parts in this batch please PM me if you would like to order a set.

Kurt Rose · #**170** Sat 13 February 2010, 14:07

Hey Metal! how much for a set to 08204. Would you mind sending your phone # with the PM so I can ask you a few questions? Just want to make sure I'm ordering everything I need. Thanks

MetalHead · #**171** Sat 13 February 2010, 14:45

I sent you a PM

JLFIN · #**172** Fri 19 February 2010, 14:37

mike ,
congrats on your recent venture, good for you
I am fairly new to the sight but was glad to see you take over the helm.
anyway, I am also interested in price on your kit
thanks

MetalHead · #**173** Fri 19 February 2010, 16:02

Sent you a PM

ppd1979 · #**174** Sun 21 February 2010, 00:17

How Much for a parts kit to 94403

MetalHead · #**175** Sun 21 February 2010, 04:53

Peter - I sent you a PM

dahoutz · #**176** Sun 21 February 2010, 18:51

How much for parts kit to 52638

MetalHead · #**177** Sun 21 February 2010, 19:36

Sent you a PM

MetalHead · #**178** Fri 26 February 2010, 18:00

Let me know if you need MechMate parts in the United States !!!

Laser Cut and Bent Parts
Machined Parts
Other MechMate Parts

Just send me a PM or an email and I will get you what you need.

Mike

ddoggett · #**179** Fri 26 February 2010, 21:56

Metalhead Mike, do you also supply custom parts? I don't have a lathe (yet).
And what is your rate/hour or do you do flat rate for required parts maching?

Thanks Dan

MetalHead · #**180** Sat 27 February 2010, 06:54

I sent you a PM.

Yes I can do custom machining.

Mike

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Laser Cut and Bent Parts - Europe	milkov	Profiled (laser cut) & bent steel plate	33	Fri 17 August 2012 13:13
Laser Cut and Bent Parts - India	dsingh82	The Market Place	10	Thu 01 October 2009 04:14
Laser cut and formed parts	Castone	Profiled (laser cut) & bent steel plate	5	Sat 05 September 2009 00:40
Greetings all From United States	derekkest	Introduce yourself and start planning	3	Tue 09 June 2009 06:29
laser burnt pre-bent parts	ghostlx	Archives	4	Mon 22 September 2008 05:18