MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 20. Gantry
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Thu 12 July 2012, 19:26
JasonC
Just call me: Jason
 
Soldotna,AK
United States of America
gantry square question

I have the gantry on the rails and seeing if its square. All 4 wheels make contact but in one small area 1 of the four wheels starts to ride up the rail outward..?.
Facing the gantry perpendictular to the beams say number 1 is front left, 2 front right, 3 back left and 4 back right..it would be number 4 thats climbing the rail when the gantry roll toward me....and only in a 2 foot section of my 5'x10'. the front two #1,2 are perfect all the way through the X rails travel.
Its only moving about a 16th to 32nd of a inch outward.

Any ideas on whats happening? My thought is the X isnt just parrallel yet.?.

Just dont want to do something that will mess up my 2 hours of adjustments.


Jason
Reply With Quote
  #2  
Old Fri 13 July 2012, 00:00
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Logically, your X-rails are not straight.
Reply With Quote
  #3  
Old Fri 13 July 2012, 00:12
JasonC
Just call me: Jason
 
Soldotna,AK
United States of America
Ok thanks.....I sure am amazing how easy the gantry rolls on the X rails..a single finger and very little effort will roll it from one end to the other.

thanks Jason
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting up to weld square Red_boards 30. Y-Car 1 Mon 30 August 2010 03:12
Base table out off square m_leblanc 10. Base Table 6 Sun 22 August 2010 12:06
Seating the Y Gantry on the X Rails - correcting a twisted gantry Greg J 20. Gantry 30 Wed 14 April 2010 02:55
Table not cutting Y square to X gorantec Troubleshooting 5 Sat 29 August 2009 12:49
C Channel of Cross Bearings not square kanankeban 10. Base Table 3 Thu 15 January 2009 08:27


All times are GMT -6. The time now is 10:16.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.