MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Common Assemblies & Parts > Driving Mechanisms: Rack/pinion, gears, screws, belts & chains
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Closed Thread
 
Thread Tools
  #1  
Old Mon 27 April 2009, 19:58
shelbygt500buddy
Just call me: kyle
 
stuart fl
United States of America
Pinion Help

Hi i wont be gearing out the motor and first because of my budget right now (22 year old college student) but my question is would i be better going with a 20 tooth or something bigger like a 40 tooth the diameter goes from like 1" to 2"... My question is whats better for the resolution?
  #2  
Old Mon 27 April 2009, 20:31
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
Kyle,
Try this section for help on this.

http://www.mechmate.com/forums/showthread.php?t=239


Thread closed - there is plenty of info in the thread above.
Closed Thread

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 22:59.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.