MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > MechMates already cutting
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #421  
Old Tue 07 October 2008, 04:30
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
I started out about 9 months ago with a 3/4" spoil board. Today because of resurfacing, the spoil board is 1/2". I normally take 1/16" or less during a resurface. The main reason I resurface the spoil board is for better vacuum hold down, the better the surface, the better the hold down, particularly smaller pieces. If it were not for that I could go twice as long without a resurface.

Last edited by J.R. Hatcher; Tue 07 October 2008 at 04:35..
Reply With Quote
  #422  
Old Wed 08 October 2008, 17:49
cncb
Just call me: Brian
 
Connecticut
United States of America
Quote:
Originally Posted by Gerald D View Post
Er, Brian, JR said: "Next time I resurface the table, I will video."

Re-surfacing of tables does not happen that often.
I know he did, but was hoping he might give in and surface for the sake of a video
Reply With Quote
  #423  
Old Tue 21 October 2008, 04:50
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Would someone give me some pointers on setting up mach for the laser offsets.
Reply With Quote
  #424  
Old Fri 24 October 2008, 06:36
sailfl
Just call me: Nils #12
 
Winter Park, FL
United States of America
JR

If you don't have the link this should help.

http://www.cnczone.com/forums/showthread.php?t=48752
Reply With Quote
  #425  
Old Sun 26 October 2008, 04:43
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Thanks Nils, it did help.
Reply With Quote
  #426  
Old Sun 26 October 2008, 16:55
Greolt
Just call me: Greg
 
Victoria
Australia
JR you sent me a PM and I did not realise. Sorry. Check your inbox.

Greg
Reply With Quote
  #427  
Old Thu 30 October 2008, 18:11
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Who is using 'Sheetcam'?
Reply With Quote
  #428  
Old Thu 30 October 2008, 21:02
hennie
Just call me: Hennie #23
 
Roodepoort JHB
South Africa
J.R. do you want to do board processing?

Try (Cutlist) also, I have been using it now for 7 years.
Reply With Quote
  #429  
Old Thu 30 October 2008, 23:11
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
JR, we have Sheetcam. We aquired it purely because it placed tabs so easily and Les Newell (the writer of Sheetcam) was willing to give us a special tab shape and a dxf output. We didn't use it to produce G-code as such.
Reply With Quote
  #430  
Old Mon 03 November 2008, 18:49
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Resurfaced the table today, and as promised here is the video. Before I ran the machine 1000 ipm. This time I decided not to run it at that speed. I am cutting .050" deep, .75 path. Sorry about the picture quality but it's all I got.

http://www.youtube.com/watch?v=EwO_KL1GRww
Reply With Quote
  #431  
Old Mon 03 November 2008, 19:39
lunaj76
Just call me: Justin #24
 
Littleton, (Colorado)
United States of America
Send a message via Skype™ to lunaj76
JR,
That is great! Thanks for the motivation.
Reply With Quote
  #432  
Old Mon 03 November 2008, 20:09
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Now at 1150 ipm ...... Was wondering about the dust extraction getting switched on .....
Reply With Quote
  #433  
Old Mon 03 November 2008, 21:51
gmessler
Just call me: Greg #15
 
Chicago IL
United States of America
GREAT video J.R.
Reply With Quote
  #434  
Old Mon 03 November 2008, 22:13
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
JR mentioned before that he is using "soft limits" for that surfacing program, and one can see how Mach ramps the speed down before the gantry reaches the end of the table.

The first thing I did with watching that video was to time the "strokes" against my watch and verify the 1150 ipm . . . . it looks right if the table is 8' long. Not that I doubted JR's word, but because we have had some funnies with indicated speed vs true speed. (In Mach3 r1.84 we had our y-axis running at half indicated speed, In ShopBot we had all axes running slower than indicated).

Another thing to remember is that JR is using "big" motors and belt-drives. Can be considered as "non-standard" for the typical MechMate builder.

And then it must also be realised that 1150 ipm is on the limits. For table surfacing, a lost step is not the end of the world (except for hitting the hard stop on the backstroke). Not a recommended speed for general pupose work. But nice to know that Mach can get it there, and that mechanically it is okay without jumping off the rails or pinions jumping out or anything else nasty like that.
Reply With Quote
  #435  
Old Tue 04 November 2008, 04:41
cncb
Just call me: Brian
 
Connecticut
United States of America
Love the video JR your machine is outstanding. ANd to think most commercial high end machines for the most part cut at or below that speed!
Reply With Quote
  #436  
Old Tue 04 November 2008, 05:30
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
My spoil board is 49" X 97". The jog speed G00 on my machine is 1175 (so I can go faster if I need to). I have soft limits set at G53 X0 X101 and Y0 Y53. The soft limit ramp up and down is 11.5". It was only running 1150 ipm for 6' the rest of the time it was either ramping up or down .
The machine gave no indications at all that it was under the least amount of strain, everything sounded normal, smooth and under control. I don't think it missed any steps at all. Next time I'll check for that.
The dust collector was on, it comes on with G-code/software. I had been working on the pipe system and did not have the MechMate reconnected, human error . I thought the last job (1/8" bit 1/4" material) was a little dusty . After connecting the pipe it did an excellent job even at that speed and volume.
Reply With Quote
  #437  
Old Wed 05 November 2008, 14:16
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
I made a mistake in my last post. The jog speed on my machine is 1375 ipm not 1175 ipm.
Reply With Quote
  #438  
Old Wed 05 November 2008, 15:02
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
Show off.
Reply With Quote
  #439  
Old Wed 05 November 2008, 15:57
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Heath that will be next time when I surface @ 1375 ipm . Maybe I'll even use a sharp cutter. The one I'm using now is dull from when I cutting under the sound barrier.

Last edited by J.R. Hatcher; Wed 05 November 2008 at 16:05..
Reply With Quote
  #440  
Old Wed 05 November 2008, 19:20
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
JR,
Have you looked into the table surfacing cutters available that have the replaceable carbide inserts? When you get dull, you just turn the cutter to another fresh face or replace it. Whiteside has a couple of different sizes and so do a few others.
Reply With Quote
  #441  
Old Thu 06 November 2008, 04:16
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Yea I did, they are a little pricey for me right now. They use the carbide cutters like metal lathe tool holders use. I think it's a good idea and in the long run I would come out a lot better. All in time . Thanks for the suggestion.
Reply With Quote
  #442  
Old Thu 06 November 2008, 06:00
Marc Shlaes
Just call me: Marc
 
Cleveland, OH
United States of America
Send a message via Skype™ to Marc Shlaes
I wish I could turn another fresh face when I get dull!
Reply With Quote
  #443  
Old Sun 09 November 2008, 18:27
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Life needs to be convenient . This is why I made changes in the dust foot.
Dust foot 5th gen:
MechMate1 039.JPGMechMate1 041.JPG
Most of time I had to raise the Z so I could drop the dust foot to do a bit change ..... no more .
The black knob is spring loaded and keeps the front half in place until pulled about 1/4", to replace the front you just push it back in until it clicks .

Dust foot 4th gen here:
http://www.mechmate.com/forums/showt...&postcount=258

Vacuum hold down system here:
http://www.mechmate.com/forums/showt...&postcount=281

MechMate1 043.JPG
I also added another blower to create more vacuum for hold down.
Didn't cut anything yet so I'm not sure how much more it sucks, will report later. 1 was working good so I know 2 is going to be even better .
Thanks Gerald for recommending that I keep all the blowers.

Last edited by J.R. Hatcher; Sun 09 November 2008 at 18:30..
Reply With Quote
  #444  
Old Mon 10 November 2008, 05:46
Greg J
Just call me: Greg #13
 
Hagerman, New Mexico
United States of America
Nice work J.R.,

It's interesting to see the different methods/styles individuals come up with for the dust foot.

At one time, I was all excited about the Z zero device. With the Shuttle Pro and a piece of paper, I can zero the Z in under 20 seconds. It's all personal preference.
Reply With Quote
  #445  
Old Mon 10 November 2008, 07:28
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Yea, it is interesting to see how many ways there are to accomplish the same objective. I like the way yours works. How did you make the hinge? Are you a skype member?
Reply With Quote
  #446  
Old Mon 10 November 2008, 19:10
cncb
Just call me: Brian
 
Connecticut
United States of America
Yeah the hinged one reminds me of that truecnc one (do I dare mention that here?) JR great work what material is the foot made out of?
Reply With Quote
  #447  
Old Mon 10 November 2008, 19:46
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
Brian I made it from PVC 1 X 8 fascia board like Lowe's or Home depot sells. It cuts good and it's light weight.
Reply With Quote
  #448  
Old Tue 11 November 2008, 06:16
Greg J
Just call me: Greg #13
 
Hagerman, New Mexico
United States of America
Quote:
Originally Posted by J.R. Hatcher View Post
How did you make the hinge? Are you a skype member?
The hinge is a round outer profile with a step cut into it. A hole is drill thru the two half's for a #10 screw.

Yes, I'm a skype member.

I meant to respond last night, but I was playing with some inlay work. This MM is amazing. The detail is phenomenal and the ease with fabricating inlays is almost too easy.
Reply With Quote
  #449  
Old Sun 16 November 2008, 07:17
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
My machine is doing a lot better, it's not making near the number of mistakes it did when it was younger. Several months ago it was making moves that were totally unexplainable. I tried not to place blame. I reasoned that G-code is a new language to it and it will eventually understand it. Well after several months it seems it has pulled itself together and is acting much more responsible, remarkably fewer mistakes. I think it just needed some time to sort things out, or perhaps ... it ... has ... finally ... learned ... G-code.
Reply With Quote
  #450  
Old Sun 16 November 2008, 11:36
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
It is amazing how these machines learn by themselves as times go by...
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
JR's rail grinding skate in a Lasered & Bent format for 4.5" grinders Gerald D Rails & Rollers 198 Mon 13 April 2015 19:59
Add one more CNC addict - North Carolina rodom Introduce yourself and start planning 0 Tue 01 December 2009 05:54
She makes dusty MOVES! - North Carolina, USA Jeffn11 Construction started, but not cutting yet 23 Sat 01 August 2009 19:36
Plasma burner started - Albemarle, North Carolina subman Construction started, but not cutting yet 8 Sat 27 September 2008 18:25
One more MechMate starting - North Carolina, USA Bernhard Construction started, but not cutting yet 5 Fri 28 December 2007 15:11


All times are GMT -6. The time now is 03:54.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.