MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > Introduce yourself and start planning
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Wed 31 October 2018, 22:53
ammercado21
Just call me: AYE
 
Palo Leyte
Philippines
MM build in the Philippines

Hi guys!
First off, I am really glad that I stumbled on this forum. I am Ariel, I am from the Philippines and I am about to begin building my MM. This is however my 2nd (big) CNC machine that I am building. I built 2 years ago a CNC plasma table with a Chinese cutter and a DIY drive systems made of bearings and angle iron rails.

For my MM, I am going for linear rails and bearing blocks, HGR20 in particular. I will be using SDSK Clearpath motors and Centroid controller. I have almost everything on hand except some electrical parts like breakers, contactors, relays and other stuff. For the main parts like the Clearpaths, HGR20s, frame materials, and spindle are on hand already.

My spindle is a water-cooled 4.2kW JGD 125/4.2 unit. And man its so massive at 26+ kilos!

My table dimensions is going to be 3.80m x 2.3m. It will be built entirely with channels.

When I first bought the MM plans, I thought I made a wrong purchase because there was no BOM. But then I realized that when I built my CNC plasma table, I had no plans with me to guide me through. So I thought, the MM plans was still a good move. Although my finished machine would be slightly different to the one on the plans, I would say it is still based on the MM parameters.

As much as I wanted to have the build completely logged and documented, I think it would be nearly impossible. However I think, I owe it to the MM community to at least post it when its completed and running.
Reply With Quote
  #2  
Old Thu 01 November 2018, 06:07
jhiggins7
Just call me: John #26
 
Hebron, Ohio
United States of America
Welcome Aye. Many "MechMate" builds documented on this FORUM are variations on the "standard MechMate". Your build sounds very interesting. We would really appreciate seeing your progress. That spindle is a monster. Your experience with linear rails/blocks, Clearpath and Centroid would also be interesting to follow.
Reply With Quote
  #3  
Old Thu 01 November 2018, 06:57
ammercado21
Just call me: AYE
 
Palo Leyte
Philippines
Hi John,
Thanks for your interest. I am particularly in the middle of researching on how I would be mounting my linear rails in the main channel beam. I am not quite sure yet on how to mill/grind or machine a smallish slot to where the rail is going to rest. The length of the channel which is almost 4 meters is going to be a challenge for my vertical mill and the space around it.

I am also considering of placing the rails on the "side" of the channel primarily to secure it from being bumped during material loading. I hope somebody could chime in to share their thoughts .
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hello from American in Philippines KE6CVH Introduce yourself and start planning 2 Mon 08 February 2016 22:38
Quest for a CNC stopped ! . . . - Philippines nes_t326 Introduce yourself and start planning 13 Sat 10 September 2011 00:58


All times are GMT -6. The time now is 11:25.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.