#451
|
|||
|
|||
How about Bamboo board? I seen a few pictures but I can't seem to find a Canadian distributor. Super strong and its a renewable resource.
Tim Still climbing the learning curve |
#452
|
|||
|
|||
LOVE bamboo...but takes a series toll on the cutting bits...but LOVE IT....did I mention I like bamboo sheet.
|
#453
|
|||
|
|||
So true - like a moth drawn to the flame, that flat stable surface of MDF is just so tempting. cough
Bamboo - I got my hand up for that. When I can figure out how to draw a fin (not the outline the foil), it would be great to make a few bamboo fins like this one I hand made. They are super strong AND they float. This particular fin was made from flooring and still have a length of it in the shed waiting for the MM to cut some time. IMG_1481.jpg Regards Ross |
#454
|
|||
|
|||
Ross,
Could be worth digitizing the fin using a touch probe. |
#455
|
|||
|
|||
Im with Graeme,
If you haven't got a probe yet...spend a 100 bucks (buy) or make one. Its super easy to point cloud that fin and reproduce. Good luck. |
#456
|
|||
|
|||
Sean - I'm lost on how the probe is driven and how the point cloud is manipulated.
Can you suggest something for me to read up about? PS - I will scan one that is way better than my hand foiled version when I do find out how to do it. Thanks Ross |
#457
|
|||
|
|||
Ross,
First, if you using Mach 3, there is a place under ports/pins to assign the input on the pmdx to probing. (I use the same pin/port for the z-touchplate) A good read is at : http://www.indoor.flyer.co.uk/probe.htm buy one here: http://www.imsrv.com/deskcnc/probe.htm or here: http://www.rockler.com/product.cfm?page=22582 and get the dxf and instructions to build one: http://www.cognitiveinnovations.com Good Luck, Sean |
#458
|
|||
|
|||
Other than using bamboo flooring does anyone have a link to bamboo board? I've had no luck looking
Tim |
#459
|
|||
|
|||
Thanks for the links btw, something else to add to the build list
Tim |
#460
|
|||
|
|||
Wrap the fin in tin foil and then treat it like touch plate . . . . . it really will work.
|
#461
|
|||
|
|||
I use bamboo a lot
and is does not float . . . www.bambooxl.nl - did a lot of CNC work for them. They have solid bamboo for beams, floors, staris, windows etc. Sorry only in Dutch for now. Next week I'll make a lounce set with 80x80mm bamboo beams. 1 chair = 55kg, table 95kg. 1050kg m3 and exterior bamboo 1250kg m3. Their slogan: 100% tree free. http://www.moso-bamboo.com/ - mostly multilayer and veneer bamboo - for desks, cabinets etc. Bamboo is hot in The Netherlands Hans |
#462
|
|||
|
|||
Another Touch Probe build Here at CNCZone
|
#463
|
|||
|
|||
Gerald,
Didn't think of that....but fantastic idea! You could use a sewing needle at that point for contact. Thanks! Sean |
#465
|
|||
|
|||
Check this out guys...came across this on ebay.
http://cgi.ebay.ca/CNC-3D-Digitizing...item3ca13f0832 Not a bad price either. |
#466
|
|||
|
|||
I can't track down the fin design software I downloaded some time ago (probably on a fried USB somewhere). Here's a link where you might be able to get it: http://www.geocities.ws/reystos/fin_designer/index.html
Here's a link to a useful helper app: http://www.grc.nasa.gov/WWW/K-12/airplane/foilsime.html Regards Red |
#467
|
|||
|
|||
Quote:
Note that it will move back to it's previous position before waiting for you. I can probably modify the macro, if you need it to stop right after zeroing the new tool. Send me an email if you want a modified version. Gerry |
#468
|
|||
|
|||
Hans - yes it does AND it has three layers of glass and resin on it, that definitely does not float.
Water weighs 1000kg per cubic meter and dry bamboo is 300- 400 kg per cubic meter. The big difference in density means that bamboo floats in water as it does not have the mass to displace the heavier liquid and sink. Bamboo Floats Big Time.jpg Thanks everyone for your good ideas. Gerald's foil idea seems the cheapest to implement so he is first cab off the rank. I have loaded a Mach3 plugin for digitising and will see what happens. Red it sounds like you have been having a good time of late at the ISA Championships. I will follow up the fin link. Regards Ross |
#469
|
|||
|
|||
Cheers Red
Got a fin out of the application - baby steps not sure it is going to give me quite what I want yet. Your foils link is dead so here is mine, it has a cross section drawn for each foil and my eventual plan was to copy the foil and sweep it over a plan shape (somehow). http://www.ae.illinois.edu/m-selig/a..._database.html. No doubt you have a good working knowledge of this stuff as do the aircraft people. For the others who may not have come into contact with this ... Using the NACA foil types one can reasonably predict the lift, stall and drag characterises (for the doubters that also includes in water using the Reynolds number for the foil). NACA 6 series is the go for our application as one of the main design goals was to maintain laminar flow over the foil and reduce drag. Laminar flow is simply the water sticking to the foil and not generating turbulence that in turn generates drag. NACA eventually morphed into NASA and put a man on the moon, that's a pretty good heritage. Regards Ross |
#470
|
|||
|
|||
Hi Ross, I am also now looking at the spindles from LOVEHAPPYSHOPPING.. did you get more than one ER-20 collet with or did you buy them from somewhere else. From the eBay ad it looks like only one ER-20 collet is supplied.
|
#471
|
|||
|
|||
Kobus, try and get hold of a Cromwell Catalogue, they are a UK company with an outlet in Jhb. Prices are generally quite good, local catalogue has ZAR pricing.
International subsidiary PO Box 30137, Jet Park, 1469, South Africa ()27 011 397 6666, 27 011 397 6668 fax, http://www.cromwell-tools.com or try these guys: http://www.avexair.com/tools_industrial.html This is from thier website: http://www.cromwell.co.uk/IDX1449015K |
#472
|
|||
|
|||
Hi Kobus
Only one collett is supplied. Ross |
#473
|
|||
|
|||
Hi Kobus
I was rushing out the door when I replied (for a Sunday surf), so a little more info for you on the collets.
Sets of metric collets are available on Ebay for around $50 AUD. You can buy them individually but after you have bought a few of the major sizes you have already paid for full set, so you might as well have all the sizes available. Not for a minute would I suggest they are of premium quality at this price but for a first set they are more than adequate. PS - liked you heart in a cage project too. Regards Ross |
#474
|
|||
|
|||
Thanks for the info. I suspected that only one collet is supplied. I have seen Metric and Imperial 'kits' on eBay.
Alan, I had dealings with Cromwell SA before...and they are not that cheap...maybe better quality than eBay but a bit pricy to my liking. |
#475
|
|||
|
|||
I would be careful with the collet quality.
I get mine locally & I prefer Japanese make & Taiwan made come in very close second. |
#476
|
|||
|
|||
Kobus,
try linearmotionbearings2008 on ebay. Chai sells the same spindles and inverters. Just mail him what spindle and inverter you want, with all the collets you want, and extra nuts if you want. Also say where it need to be shipped to, and he will give you a price for it, and a direct link to his ebay store with all the products you asked for in a set. Best regards Sascha |
#477
|
|||
|
|||
Bedankt Sascha. Gaan nu kijken bij linearmotionbearings2008
|
#478
|
|||
|
|||
Grounding The Braided Shield in Cables
Earthing
I was playing around with grounding the braided shield for the motor and signal wires on my machine this evening. The Mach3 2010 screen set has a probe indicator on the home screen, with the shields not earthed I was able to get a pretty consistent flicker on the probe pin. It did not do anything kooky and even probed to find the Z correctly despite the flickering of the probe indicator. Reconnecting the braided shield from all the wires to earth completely removed the external signal noise that the Break Out Board was picking up on the pin. Just though it might be useful to other builders to reinforce that earthing is important with your builds. Inlay Test I tried to inlay a bit of .8mm laminate into some MDF - turned out quite well. IMG_1474.jpg 3D Probing Also tried some suggestions re probing a 3D object and was getting some software errors. Have not had time to sort those out, so need to get a few other projects out of the way and return with my thinking cap on next time. Mach3 2010 Screenset A short note to say how impressed I have been with Ger's screenset. It goes well beyond just making the screens nice, it gives some lovely function. I like the one touch go to a toolchange position or go to a parking position. The Z height probing works perfectly and the tool display path is massive. Ger said he was going to do some updates, not only did he do that, he sent me the updates when he had done them !! Similarly he did some bug fixes that related to a specific version of Mach3. I don't know Ger, don't work for him etc etc but he has given me great service and his screenset is really headed in the right direction to automate CNC machinery for a tiny price. Worth a look at http://home.comcast.net/~cncwoodworker/2010.html Regards Ross |
#479
|
|||
|
|||
Nearly a month since my last post, must be spending to much time annoying the other Australian builders like Red Boards and Tangocharlie
Enough of those nicely completed works so often seen on the forum - how's this for a disaster. Hot Al.jpg It was all going fine until the heat built up so much that the chips were remelting before I could suck them out. Once I unscrewed the block it was clear just how hot the aluminium had become - really really hot. Initially I was quite confident as I had used some feeds and speeds that Dmitry had posted. Next attempt I will use compressed air to clear the chips AND cool the workpiece. Note how cleanly the 4mm hole cut with a 3mm end mill, I suspect this is because it had some clearance for the chips. One day I will cut aluminium well but just not today. Regards Ross |
#480
|
|||
|
|||
Ross - maybe you got the wrong aluminum alloy, usually folks hear swear by 6061 T6 grade for good machining
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wiifm's plans for building in Brisbane | wiifm | Introduce yourself and start planning | 31 | Thu 14 October 2021 17:48 |
Making Bar Signs! #71 - Brisbane, Australia | AuS MaDDoG | MechMates already cutting | 440 | Mon 12 February 2018 00:40 |
Touch Probes Have Arrived #72 - Brisbane, Australia | skippy | MechMates already cutting | 130 | Mon 04 March 2013 04:31 |
Do my legs look fat? - Brisbane Australia | tangocharlie123 | Construction started, but not cutting yet | 60 | Wed 22 June 2011 06:32 |
New member - Brisbane Australia | stan stuart | Introduce yourself and start planning | 3 | Tue 11 May 2010 20:48 |