Messed up while cutting-grinding a rail

[kanankeban]

Hi guys,
Does anybody knows if 27mm rails will be ok? I spoiled the center of a rail...with a bump...and have to rectify the rails to 27mm instead of 28mm, is there any inconvinience ?

[J.R. Hatcher]

Hector if the spoiled area is small you can add mig weld and file the top back down flat , then continue grinding.

[kanankeban]

Originally Posted by J.R. Hatcher

Hector if the spoiled area is small you can add mig weld and file the top back down flat , then continue grinding.

Thought it was worst, but after fine checking its just a spot about 2 inches in lenght and 1mm deep, thought same thing as you proposed...just a small weld

Thanks...for the help

[Gerald D]

It is your choice whether welding or more grinding to 27mm. (The 27mm will also be okay)