|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#31
|
|||
|
|||
hmmm i havent atm time to deepening to vfd manual, but it sounds like faulty unit. Especially when its screen is showing output, but it really dont have any.
I am using too chinese vfd/spindle combo, but guess why i have on the shelf spare ones |
#32
|
|||
|
|||
I do not have a clue. But I am going to order the spindle/vfd in the video. maybe he has good settings. 2.2kw with vfd . https://www.youtube.com/watch?v=1sf2zLQu5CU
Last edited by IamDave; Fri 09 March 2018 at 17:42.. Reason: I forgot video.. |
#33
|
|||
|
|||
I suggest to buy instead of 2.2kw 3kw unit. Price is almost same, but you get better spindle with more low rpm torque and bigger bearings.
I am using those https://www.ebay.de/itm/EU-3KW-ER20-...-/253468515537 According to this http://vi.vipr.ebaydesc.com/ws/eBayI...1&secureDesc=0 are those inverters original huanyang. |
#34
|
|||
|
|||
so it work.
|
#35
|
|||
|
|||
some modification about the vfd wiring
|
#36
|
|||
|
|||
Z axis next stage
|
#37
|
|||
|
|||
courage,moi je commence
|
#38
|
|||
|
|||
Hello. First test.
|
#39
|
|||
|
|||
Salut Eric. Il ya des etapes a bien préparer pour ne pas recommencer. Sinon cest un bon projet.
|
#40
|
|||
|
|||
Je suis d'accord que c'est un bon début de projet.
|
#41
|
|||
|
|||
Does Mach 3 run on your laptop without problems?
|
#42
|
|||
|
|||
yes for the moment i don't have any problems with mach3 on the laptop. (break out board with usb and driver for mach3).
|
#43
|
|||
|
|||
I like the way you used the square tube on the gantry, for the wires.
|
#44
|
|||
|
|||
hello, Yes I have drilled twice for all the cabling. i can put a photo if you want
somebody have a vacuum table? |
#45
|
|||
|
|||
Yannick. How long is the z slide rack on yours? I cut mine 11.8 inches on an 18 inch tooled plate. I only drilled 2 holes to hold it on. I get confused on the drawings as to the length options.
|
#46
|
|||
|
|||
What are you making now, Yannick?
|
#47
|
|||
|
|||
hello. i'm back
|
#48
|
|||
|
|||
Hey !!..welcome back
|
#49
|
|||
|
|||
some progress with the machine and with the software. i use mach3 and vcarve.
|
#50
|
|||
|
|||
cool
|
#51
|
|||
|
|||
Making cuts in exotic wood
|
#52
|
|||
|
|||
nice. what are you making with the exotic timber?
|
#53
|
|||
|
|||
hello Dennis
for now i just trying to undestand vectric. and mach3. and mechmate. . |
#54
|
|||
|
|||
Dennis, slap some logo's on your MechMate and earn a serial number. Undoubtedly your's will be the first MechMate in Reunion.
I'm also loving the exotic wood |
#55
|
|||
|
|||
Making cuts in medium
|
#56
|
|||
|
|||
The result
|
#57
|
|||
|
|||
Ah!
Now I see what you were cutting. Good work |
#58
|
|||
|
|||
nice
|
#59
|
|||
|
|||
Some progress
|
#60
|
|||
|
|||
chouette,loin d' en etre la mais ç a avance pour moi aussi
|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
More progress, it cuts ! #109 - Hampshire, UK | Andrew_standen | MechMates already cutting | 75 | Thu 23 July 2020 13:23 |
First Cuts And Has Stickers! #126 - Genesee, WI | hflwaterski | MechMates already cutting | 215 | Tue 11 April 2017 12:00 |
First Cuts #108 - Willemstad,Netherlands | parrulho | MechMates already cutting | 154 | Sat 15 November 2014 12:14 |
Making First Cuts #56 - Empangeni S. Africa | Lex | MechMates already cutting | 263 | Tue 30 October 2012 23:14 |
My first cuts | bbreaker | The Show Room | 2 | Sun 22 June 2008 23:06 |