|
|
#1
Thu 07 February 2008, 05:35
|
|||
|
|||
|
servo motors
Looking for a source for dc brush servo motors 800-1000 oz-in
|
|
#2
Thu 07 February 2008, 08:46
|
|||
|
|||
|
Eloid,
Those would be some might large motors. I have an MCG ID33004. That motor weighs 10.5 lb, is 7.78 inches long, and has only about 220 oz*in torque. From what I've read, servo motors are usually used with gearboxes to get the required torque at the needed speed. |
|
#3
Thu 07 February 2008, 12:38
|
|||
|
|||
|
servos
you got it. 3.6 or 7.2 I like servo cuase the quiter and torque is more linear vs rpm.
|
|
#4
Mon 12 May 2008, 09:19
|
|||
|
|||
|
This is a good servo motor price and torque.
130SJT-M075D -- 1.6KW - 7.5Nm - 2500rpm - 6.0A 410$ aprox. And this is a very good torque 130SJT-M150B --- 2.3KW - 15Nm - 1500rpm - 9.5A 500$ aprox. perfects for configure a plasma beast.  Last edited by isladelobos; Mon 12 May 2008 at 09:23.. |
 |
|
|
