#1
|
|||
|
|||
Done..
Got my Vinyl letters.. Now it looks like something..
3-D Sign Hot off the press, Made out of Blue extruded foam |
#2
|
|||
|
|||
Sign details
Wayne,
I just used what I had in the cupboard.. I used some Kilz primer sealer 3 coats so I could sand flaws, then I used some Painters Touch acrylic/latex (Green), the for the gold I used acrylic/latex that my sons and I bought at Micheals for anouther project, then topped it all off with a couple coats of clear. Here's a tip - when doing a foam sign don't let anyone near it untill you have a hard coat on it.. you can see a couple of finger dents on my sign because the boys and the neighbors had to test it to see if it was actually foam.. |
#3
|
|||
|
|||
What did you use to paint the foam with? Anything in particular?
|
#4
|
|||
|
|||
Jack,
Take a look at the post copied from Rene's personal thread for the paint info. |
|
|