|
|
|||||||
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools |
|
#121
Fri 22 November 2019, 05:21
|
|||
|
|||
|
No, no filtration. This fan actually creates a breeze through the box, and blows out.
I used aluminum tubing, and a screen mesh, as my heat sinks. Filtration filter was a thought. I may add it later, if needed. 
|
|
#122
Wed 11 March 2020, 05:58
|
|||
|
|||
|
Does anyone cut 1 inch mdf or extira on a regular basis, with their machine?
|
|
#123
Sat 21 March 2020, 06:24
|
|||
|
|||
|
Figured it out. Was just cutting to fast, losing steps here and there. Experience can have it's cost. Wore out the bearing in my first spindle, two bearing. Spindle cut about 450 sheets of extira. Not bad for a 200 investment. Well worth it for the savings in broken bits using the porter cable setup.
|
|
#124
Sun 22 March 2020, 09:28
|
|||
|
|||
|
It's like a ghost town around here, in N. Ga.
|
|
#125
Wed 22 December 2021, 12:31
|
|||
|
|||
|
Out with the Old-----In with the new.
Well time has come, as planned. My little 4x4 build is growing. After cutting close to 8-900 sheets of 1-inch Extira and plywood, and lots of bits and mistakes.
 .. I took it apart this week. Going to build her back soon bigger. Learned a lot and gained a lot of knowledge, I didn't have before. It was still sad to take apart, after all the work I put in it.
|
|
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ball Screw For Sale | Francois | The Market Place | 1 | Mon 06 February 2012 23:25 |
| Ball screws | Richards | Driving Mechanisms: Rack/pinion, gears, screws, belts & chains | 1 | Sun 28 August 2011 07:31 |
| hobbed or ground rack? | southernduckie | Rails & Rollers | 11 | Thu 26 May 2011 08:36 |
| Stepper motors giving trouble - Motors burnt while serving as ground for elec. fault | Daya | Troubleshooting | 45 | Mon 21 April 2008 01:05 |
| Round shafts & ball slide blocks versus V-rails & V-wheels | joepardy | Rails & Rollers | 28 | Fri 07 December 2007 12:41 |
