MechMate CNC Router Forum - Initial opinions with this geared motor:

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- Motors & their mountings (http://www.mechmate.com/forums/forumdisplay.php?f=26)

- - Initial opinions with this geared motor: (http://www.mechmate.com/forums/showthread.php?t=1351)

sprayhead

Fri 30 January 2009 05:02

Initial opinions with this geared motor:

http://www.akiyama.com.br/arquivos/892371.pdf

It seems to be a fairly big motor.

Thanks
Francis

Gerald D

Fri 30 January 2009 07:05

Don't think that 8mm shaft will handle a spring-loaded pinion on its tip.

All times are GMT -6. The time now is 02:04.