MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Motors & their mountings (http://www.mechmate.com/forums/forumdisplay.php?f=26)
-   -   Motore Stepper directly on the rack (http://www.mechmate.com/forums/showthread.php?t=3232)

forumcnc Sun 02 January 2011 04:34

Motore Stepper directly on the rack
 
Hello

Can you tell meif it is you can mount a motor directly on the rack without any type of gearbox and stepper motor to take power

Thanks

MetalHead Sun 02 January 2011 05:29

You can direct drive the system without a gear box. NEMA 34 Motors are what the system uses.

http://www.solarbotics.net/library/p...f/motorbas.pdf

Welcome to the team also !!!

forumcnc Sun 02 January 2011 08:54

thanks for the reply

But is there any online store where I buy them

forumcnc Mon 03 January 2011 06:44

sorry I'm Italian and I could not find anything and indicates some possible

MetalHead Mon 03 January 2011 06:49

(I removed my previous post since I posted it logged in as Admin)

If you look at the main forum you will see it broken down in sections.

http://www.mechmate.com/forums/forumdisplay.php?f=26

Is where I would start. It talks a lot about the different motors. Also look at the "MechMates Already Cutting" and you will see completed builds and can learn from those threads also.


All times are GMT -6. The time now is 23:23.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.