3D carving - test
1 Attachment(s)
With nothing left to do on the machine;) I decided I should probably start using it and test the capabilities.
This is my first 3D carving on this machine. It was a free sample downloaded from www.vectorart3d.com. I also used their (free) milling program to generate the g-code required to cut this sample. The sample was rough cut with a 3/16" endmill, and finish cut with a 1/8" ballmill. Total cut time was about 15mins. |
All times are GMT -6. The time now is 06:17. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.