Using a chain for a rack
Using a chain is a common means of moving a trolley along a rail. The chain is tack welded to an overhead I-beam and a sprocket that is inside the trolley engages the chain. As the sprocket is turned, either by power or manually, it traverses the chain in rack fashion. My question is; can a chain be used in place of a rack for the rack and pinion drive? Racks are very expensive.
|
Mr Ron,
It has been done and wasn't very sucessful. See this build #62. |
In comparison to the rest of the build, I think the rack is one of the less expensive and more important parts.
It really isn't much off a savings to go with a chain, and your performance will suffer. |
All times are GMT -6. The time now is 21:06. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.