MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   20. Gantry (http://www.mechmate.com/forums/forumdisplay.php?f=23)
-   -   10 20 235 Placement question - where does this part go? (http://www.mechmate.com/forums/showthread.php?t=236)

dneisler Tue 17 April 2007 21:24

10 20 235 Placement question - where does this part go?
 
Gerald,
Been reading the plans alot lately since I am about to get a little time, to MAYBE start a build. I am not seeing or understanding the placment or use of this item. Probably right under my nose and just not seeing it. Can you shed some light on it?

Gerald_D Tue 17 April 2007 22:20

When having problems like this, look at the top left corner of the title block of a drawing. In this case it says: Higher drawings: 10 20 200 A (1x assembly per gantry).

On drawing 10 20 200 A you will see 10 20 235 mentioned.

It goes down the inside of the gantry tubes, and it acts as a row of nuts for the screws that hold the y-rail down.

dneisler Wed 18 April 2007 07:22

That is what I was thinking, just never could confirm it.

Thanks


All times are GMT -6. The time now is 00:42.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.