MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- 50. Toolheads (http://www.mechmate.com/forums/forumdisplay.php?f=25)

- - Dremel holder (http://www.mechmate.com/forums/showthread.php?t=879)

normand blais

Sun 06 July 2008 05:24

Dremel holder

1 Attachment(s)

This is a holder I made for a dremel.It is stack plywood .With a micrometer it is easy to take mesure of the diameter of the tool every .75 inch and make a plug the size of a router that will fit in the tool holder. When I carve I do the rough with a regular router and a larger bit. Then I switch to the dremel and smaller bit for the very long finishing pass. The bit are cheap and it is quieter.
Normand Blais

All times are GMT -6. The time now is 02:13.