MechMate CNC Router Forum - C Channel of Cross Bearings not square

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- 10. Base Table (http://www.mechmate.com/forums/forumdisplay.php?f=27)

- - C Channel of Cross Bearings not square (http://www.mechmate.com/forums/showthread.php?t=1309)

kanankeban

Wed 14 January 2009 17:59

C Channel of Cross Bearings not square

The C Channel I bought for the cross bearers is not square, I mean it is straight but its profile has not perfect 90 degree angles in the corners it has more than 90 degrees to explain it in other way the C is kind of open, Not so good quality control i guess, is this common is this type of profile?. Im concern about this, does this afects the table in some manner? My logic tells me that Ill not hace a problem, but Ill better ask before welding.

Gerald D

Wed 14 January 2009 20:08

Hector, for this job it will be 100%. No problems expected.

kanankeban

Thu 15 January 2009 06:23

Quote:

Originally Posted by Gerald D

Hector, for this job it will be 100%. No problems expected.

Gerald,
Thats what I expected...but is better to ask :D
Thanks again for your help...
Regards,
Hector

YRD	Thu 15 January 2009 08:27

Hector,

Vejo que isto é um problema para os Latinos :D

Olhe aqui meu caso

All times are GMT -6. The time now is 20:39.