MechMate #5 Overpriced listing on ebay
http://www.ebay.com/itm/CNC-Router-M...item336e228c3a
I saw this on ebay. I wondered if anyone knows what build this is and if it's documented here. |
Darin,
It's MM #5. My old machine. The advertisement for that machine is very incorrect. It has a 5HP Porter Cable 7518 Router, the z - axis is a custom 36" stroke unit with cable assist for sculpting foam. A 4th axis attachment for 48" x 48" x 96" foam blocks is integrated under the table top surface for LARGE statue fabrication. This machine was bought at auction when the company I worked for/built it for went bankrupt leaving me without payment for this asset. So, it's being sold by the 2nd owner clearly for a handsome profit if he got the asking price. I think he paid 3500.00 for it at auction. It's only worth about 4-6k in it's current condition (not the 12K asking price) I still have sour grapes about loosing this machine, but it is well built and really a one-of-a-kind for the right foam fabricator. |
I thought that was your old machine.
|
info
Sean,
Thanks for the info. I would definitely be interested at a reasonable price, but at the current buy it now I will continue with my plan to build myself. This was exactly the information I needed to decide if I want to pursue this any further. I'm sorry to hear you lost it without compensation. Knowing that I would feel like I slighted you if I bought it. |
Darin
That machine cost me exactly 6,847.18 plus labor to build in 2007 that included the computer, Mach3, LazyCam license.. The 4th axis and extended z was added later for about another 1000.00. Great machine - but WAY overpriced. |
Well, if they added "smreish signature edition" to the description it would be worth another $5152.82, wouldn't it? ;)
|
It's interesting that the headline states that it includes AutoCad...
|
Interesting to see the price is now down to $7,900 and it still has not sold.
|
....I hope it never sells and he is stuck with it! *I'm not bitter or anything like that!* ;)
|
See, I think you guys are all wrong... I think MM's are like wine, the older the better :) and more expensive.. hehehehe.. :)
|
See, I think you guys are all wrong... I think MM's are like wine, the older the better and more expensive.. hehehehe..
I think what you mean is MechMaters are like wine, the older the better... |
I hope he sells it, and whoever buys it contacts Sean for a service call....cha ching!!!!
|
@Leko; Ouch!.. That's just wrong..:D
|
Maybe by the end of the week he can DONATE it to Sean if it is not sold.
|
I was just trying to fathom the sum Sean would charge for such a call $$$$$$$$$$
|
At least $7,847.18 I would suspect.
|
It's now on sale for $5.700 : MechMate#5
Through, could the less than 100 hours exact ? The sacrificial table is not a lot carved... If I lived in USA, I would consider this offer. |
...5,700 fair - actually a pretty good value knowing all I do about that machine.
I'd give him 1500 cash right now if he would take it. |
Remember, that is just the opening bid. He may have a higher reserve price.
|
The good price for anything is the price you get when it's sold. ;)
It can be sold at any price. Depending only of the seller pleasure. |
I saw that item on eBay and was contemplating buying it. It's not too far from where I live but his lack of description of the machine leaves something to be desired. I had no idea it was a 4-axis machine.
|
Read my build threads on Machine #5 build, Orlando, Florida. You will get all the detail you need about that machine.
|
|
No sale!
Quote:
|
My thoughts exactly. We will see if he re-lists.
|
I am just starting a build about an hour from Orlando so I made an appointment to inspect this machine and saw it on Friday. With my limited knowledge, I think I may have seen some possible "issues". There was some rust and some corroded spots on the x axis rails which might not be a big deal but there was also a bit of play in the gantry. Just a little rattle that I didn't expect. Also the spindle was resting on the spoil board as if the z axis motor was not able to hold the spindle up when switched off. For some reason I didn't get to see the machine run..... These things I saw could be normal wear and tear for all I know but it was enough for me not to make any offers. Smreish: Great job! Yes, the seller is in the foam business and the machine did have a very tall z axis. The ebay ad expired last night with zero bids. The seller was very nice but indicated that he would not consider less than $5700 so I guess I will continue with my own build.
|
All times are GMT -6. The time now is 02:00. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.