MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Motors & their mountings (http://www.mechmate.com/forums/forumdisplay.php?f=26)
-   -   Motors (http://www.mechmate.com/forums/showthread.php?t=3971)

BILL F Wed 02 January 2013 08:36

Motors
 
How well will the motor be with a G540?
3.3 N·m, 86 mm (470 oz·in, NEMA 34) Stepper Motor
motor

Holding Torque (Series Wiring) 3.3 N·m (470 oz·in)
Amps/Phase (Series Wiring) 3.0 A
Resistance 0.8 Ω
Inductance 3.5 mH
Rotor Inertia 1400 g·cm²
Length 80 mm
Weight 2.3Kg
Leads/Wires (Color Coded) 8
Shaft Type 12.7 mm, Flat

Step Angle 1.8 °
Stepping Accuracy 5%
Temperature Rise 80 °C Max
Ambient Temperature -20 °C to +50 °C
Insulation Resistance 100 MΩMin 500 VDC
Dielectric Strength 500 VAC 1 Minute
Maximum Radial Load 0.06 mm (450 g)
Maximum Thrust Load 0.08 mm

bradm Wed 02 January 2013 08:44

Looks like a very good match.


All times are GMT -6. The time now is 13:42.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.