Which Oriental Motor For 2018
Which Oriental Motor, is recommended for 2018?
|
PK296A2A-SG7.2 from Oriental Motor Company $257
|
What are you cutting with your machine. If doing fine detail 3d work I would not recommend a Spur Gear because of the backlash that will always be present in a gearbox. I would recommend a stepper with a belt reduction instead.
|
I cut exterior fretwork mainly 1 inch, and 1.25" Extira.
|
Even with belt reduction you're going to get some unsavory indications of the gears themselves.
|
All times are GMT -6. The time now is 05:12. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.