hmmm i havent atm time to deepening to vfd manual, but it sounds like faulty unit. Especially when its screen is showing output, but it really dont have any.
I am using too chinese vfd/spindle combo, but guess why i have on the shelf spare ones :) |
I do not have a clue. But I am going to order the spindle/vfd in the video. maybe he has good settings. 2.2kw with vfd . https://www.youtube.com/watch?v=1sf2zLQu5CU
|
I suggest to buy instead of 2.2kw 3kw unit. Price is almost same, but you get better spindle with more low rpm torque and bigger bearings.
I am using those https://www.ebay.de/itm/EU-3KW-ER20-...-/253468515537 According to this http://vi.vipr.ebaydesc.com/ws/eBayI...1&secureDesc=0 are those inverters original huanyang. |
so it work.
|
3 Attachment(s)
some modification about the vfd wiring :D
|
1 Attachment(s)
Z axis next stage
|
courage,moi je commence:D
|
1 Attachment(s)
Hello. First test.
|
Salut Eric. Il ya des etapes a bien préparer pour ne pas recommencer. Sinon cest un bon projet.
|
Je suis d'accord que c'est un bon début de projet.
|
Does Mach 3 run on your laptop without problems?
|
yes for the moment i don't have any problems with mach3 on the laptop. (break out board with usb and driver for mach3).
|
I like the way you used the square tube on the gantry, for the wires.
|
hello, Yes I have drilled twice for all the cabling. i can put a photo if you want
somebody have a vacuum table? |
Yannick. How long is the z slide rack on yours? I cut mine 11.8 inches on an 18 inch tooled plate. I only drilled 2 holes to hold it on. I get confused on the drawings as to the length options.
|
What are you making now, Yannick?
|
hello. i'm back :)
|
Hey !!..welcome back :p
;) |
1 Attachment(s)
some progress with the machine and with the software. i use mach3 and vcarve.
|
cool
|
3 Attachment(s)
Making cuts in exotic wood
|
:cool: nice. what are you making with the exotic timber?
|
hello Dennis
for now i just trying to undestand vectric. and mach3. and mechmate. ;). |
Dennis, slap some logo's on your MechMate and earn a serial number. Undoubtedly your's will be the first MechMate in Reunion.
I'm also loving the exotic wood |
1 Attachment(s)
Making cuts in medium
|
1 Attachment(s)
The result
|
Ah!
Now I see what you were cutting. Good work:) |
nice
|
1 Attachment(s)
Some progress
|
chouette,loin d' en etre la mais ç a avance pour moi aussi
|
All times are GMT -6. The time now is 05:30. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.