Hi All,

Time to drop in again with some more pics.

My Grandma asked if I could cut out a few tree shapes for her so she can paint them and turn them into fridge magnets. I told her that I would see what I could do.

Attachment 4810

It took just under a minute to do each one. She only wanted four or five but since they were so quick and easy to make, I made a few extras. It is 3mm MDF and was cut with a 3mm router bit.

Today I cut some signs from treated pine. An acquaintance has a commercial machine but was unable to do these due to time restrictions and also due to the size of one of them. The longest sign is 3 meters long and his machine only has an 8 foot bed (2.4 meters) so it was going to be difficult for him to cut anyway. I'm fairly certain that I didn't mention that my machine is home made, cost heaps less than his, but can do more... Well maybe once I did :)

Attachment 4811

I think I'm getting the hang of all of this.

Regards,

Jayson.