MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   The Market Place (http://www.mechmate.com/forums/forumdisplay.php?f=69)
-   -   For Sale - selling all my Mechmate parts I have (http://www.mechmate.com/forums/showthread.php?t=3050)

David S Wed 22 September 2010 11:47

For Sale - selling all my Mechmate parts I have
 
So times are tough and I can't try to wait it out any longer
I am selling all my Mechmate parts I have. I started this build
back in 2007 and bought mostly new hevay duty parts. I want to sell
everything in one lot. Included in sell are as follows


1 each - Seimens type 12 Encolsure which includes disconect, fuses, 4pole heavy duty relay(new)
4 each - Oriental motors PK296A1A-SG7.2(new)
1 each - antek PS-5N70(new)
4 each - Geckodrive G202 (new)
1 each - PMDX-122 breakout board(new)
1 set - clasic style cairage pre-bent ready to weld(bought form donald on fourm)
12 each - size 3 Guide wheel, sealed bearings from superior bearing(new)
4 each - size 3 bushing, adjustable from superior bearing(new)
3 each - Browning spur gear YSS2035 20 deg 35 teeth 1/2" bor(new)
1 each - Browning spur gear YSS2035 20 deg 20 teeth 1/2" bor(new)
144 feet - cable JZ-HF-CY,4x0.75mm2(18AWG) part# 15947(new see attached for specs)
36 feet - cable JZ-HF-CY,4x2.5mm2(14AWG) part# 15926
36 feet - cable JZ-HF-CY,7.05,5mm2(20AWG) part# 15934
1 each - Used hp 1200mhz computer capable of running Mach3
1 each - 17" elo evolution touch screen monitor
A-B heavy duty momentary and push/pull switches (used)

I aslo have some cable ladder and misc including printed set of plans(older set)

http://thol.us/MechMate/DSC04399.jpg
http://thol.us/MechMate/DSC04400.jpg
http://thol.us/MechMate/DSC04401.jpg
http://thol.us/MechMate/DSC04402.jpg
http://thol.us/MechMate/DSC04505.jpg
http://thol.us/MechMate/scan0001.jpg

I do not have any metal execpt carriage
I do not have gear rack
I do not have spindel

paid ~$5000 in parts
Asking $3800

MetalHead I will make a $100.00 donation to this site if/when I sell the package

located in Ogden Ut

PM with questions/offers

Thanks for looking
Dave

giz Wed 22 September 2010 13:29

Good luck with the sale. I'm in SLC, but unfortunately have a different setup in mind.

GC3 Wed 22 September 2010 20:57

can u ship to san diego ca 92154 ?

David S Wed 22 September 2010 21:26

I can ship anywhere. would have to figure out cost, PM me if your seriously considering buying.

Thanks
David

alan254 Sat 02 October 2010 05:18

am intrrester in motors and grecos need to know how much may take all

thanks al

Mojo Sun 10 October 2010 21:51

I would be interested in purchasing all but the laser cut package. I am in Arizona let me know if you decide to break it down a bit thanks.

jessyjames Tue 12 October 2010 23:45

Dave sorry to hear you are going through tough times. I wish you the best my friend.

David S Mon 06 December 2010 21:34

bump

David S Wed 08 December 2010 20:31

My wife has asked me to get this stuff sold. I am taking offers on all items listed above before listing on ebay this weekend.


PM me
Thanks
David

David S Thu 09 December 2010 09:07

I will post items that have sold here in the thread.

verified Paypal is prefered method of payment

please PM with offers all offers considered

Thanks
David


1 each - PMDX-122 breakout board(new) $sold

David S Thu 09 December 2010 10:30

*sold*

144 feet - cable JZ-HF-CY,4x0.75mm2(18AWG) part# 15947(new see attached for specs)
36 feet - cable JZ-HF-CY,4x2.5mm2(14AWG) part# 15926
36 feet - cable JZ-HF-CY,7.05,5mm2(20AWG) part# 15934
cable ladder

David S Thu 09 December 2010 10:49

*sold*

4 each - Oriental motors PK296A1A-SG7.2
4 each - Geckodrive G202

David S Mon 13 December 2010 15:50

please post that you have received your stuff

Thanks
David

JamesJ Mon 13 December 2010 17:53

David
My PMDX-122 arrived.

gooberdog Mon 13 December 2010 21:04

Hi David,
got the wire today, thanks
Chuck

toad Tue 14 December 2010 09:53

Dave:
What are you asking for the laser cut parts?
Toad

David S Tue 14 December 2010 18:24

Quote:
Originally Posted by toad View Post
Dave:
What are you asking for the laser cut parts?
Toad
"clasic style" carriage pre-bent $200 + shipping
take note this is the older style carage. metalhead has upgrade parts but I do not know the cost.

David

toad Wed 15 December 2010 06:23

David;
Thanks for letting mre know that they are the older style. I am going to hold off for now.

Toad

toad Wed 15 December 2010 06:56

David;
Would you take $100.00

Toad

MetalHead Wed 15 December 2010 09:17

Hey toad... PM David on the prices.

David S Fri 17 December 2010 13:55

*sold*
1 set - clasic style cairage pre-bent ready to weld

David S Sat 18 December 2010 11:52

*sold*

12 each - size 3 Guide wheel, sealed bearings from superior bearing(new)
4 each - size 3 bushing, adjustable from superior bearing(new)

toad Mon 27 December 2010 12:08

Received laser pts today. Thank you and merry christmas.

Toad

David S Tue 28 December 2010 18:01

*sold*

3 each - Browning spur gear YSS2035 20 deg 35 teeth 1/2" bor(new)
1 each - Browning spur gear YSS2035 20 deg 20 teeth 1/2" bor(new)

woodcutter Mon 04 April 2011 13:46

part
 
do you have any bearings or metal left

David S Mon 04 April 2011 21:47

Sorry no they have sold

David


All times are GMT -6. The time now is 12:27.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.