Vectric Textures
 

Pine and kiaat pieces about 8 to 10 inches square...

Then, a light touch of hand sanding.....

Then, brushed with shoe polish.....

Gerald,
What size bit were you using for the texturing? I have also seen some pictures of a desk you did with the texturing as well. It looked impressive. Do panels with this texturing take a long time to cut?

Going from (bad) memory, the cutter is 38mm [1.5"] diam ball and it took about 30 to 40 mins to "texture" a 2.4mx1.2m [8'x4'] area?