4 Attachment(s)
A quick job for one of my suppliers (My first export order...:D)
Attachment 5950 Base is of African Mahogany (I think :confused:) Attachment 5951 Attachment 5952 3D engraved text Attachment 5953 close up of the text - still with direct drive motors |
I see you also went and visited PTR in Woodstock.Better watch Kobus don`t like it when we do small cutting.What was your feeding speed?
|
Actually I used a ProTech 30deg V groove I picked up at Hardware Centre CT. Feed speed was 1000mm/min, time to machine about 8 min. I also machined the bevel base with the MechMate. Clamped the block upside down at an angle and ran the head up and down across the block feeding Z down a little bit at a time manually - like one would do on a milling machine, writing the code would have taken me longer :p.
|
Hey you guys, what about RETURN on INVESTMENT...you are not suppose to have FUN
Pragtig |
Beautiful work Alan.
|
All times are GMT -6. The time now is 09:22. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.