2.2kW/3h.p. Water-cooled Spindle c/w Matching VFD SOLD
 

I need to let go of this spare new set to fund a root blower.

Completely new in box, tested & setup for immergency replacement.

USD500 + shipping

Will ship anywhere.

Hi Ken, Looks like your visit has got you moving on vac hold down. Keep in mind that the roots blower generates a healthy amount (or should I say unhealthy) amount of heat. You have to keep an eye on temp and a dedicated blower that cools the main body will suffice but on a hot day, you really have to watch the temp. Always remember to warm up for about five minutes and cool down before shut down. It will make a huge difference on the life of your pump. Also, go for 4 inch and 15 hp with inverter if at all possible. It will make a big difference on your power bill. Good luck!

Hi David,
Thanks for the head up. I'm all spiced up for a vacuum hold-down, but need to consolidate my financial position before I can make up my final choice. A proper pump is a huge capital expenditure & it can cost more then what I spend on my MM if not careful...

Guys,
USD500 is only an indication, negotiable... pm me if you wish :)
They are totally unused, but programmed & tested.
I have spare of everything but since the spindle on my machine can take so much abuse, reliable & works better then I anticipated so I guess it is ok to reduce my stock level ;)

HI Ken ,

Got any pictures? Brand names?

Rene

I apologise for not posting the photo for I was taken ill for while now. Will post some once I'm fit enough to turn up at work.
This is the popular Chinese Water cooled spindle + VFD Huanyang HY02D223B VFD combo.
Identical as this photo posted in the forum
The manual is here.
some threads in the forum.
http://www.mechmate.com/forums/showt...cooled+spindle
http://www.mechmate.com/forums/showt...cooled+spindle
http://www.mechmate.com/forums/showt...84&postcount=1
http://www.mechmate.com/forums/showthread.php?t=1008

and a lot more...

Hope this helps

Ken

The spindle + VFD package is no longer on sales.