MechMate CNC Router Forum - Not quite the first cut, Suffolk UK

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- MechMates already cutting (http://www.mechmate.com/forums/forumdisplay.php?f=78)

- - Not quite the first cut, Suffolk UK (http://www.mechmate.com/forums/showthread.php?t=5155)

sphericos

Mon 21 December 2015 03:18

Not quite the first cut, Suffolk UK

My machine has been fully functional for a couple of days but due to stupidity on my part I was hunting for a fault that was just human error. I was running the spindle backwards. It did cut just not very well.

https://youtu.be/__fp9QJMRas

lonestaral

Mon 21 December 2015 03:41

Well done.
All shiny and new.(It wont last):D

jhiggins7

Mon 21 December 2015 05:24

A work of art! Just needs some logos

sphericos

Tue 22 December 2015 04:12

I will probably get around to the logo after Christmas. I still have a few minor things to finish, I still need to glue down the spoilboard and surface it. My 12v estop circuit is working but I still need to finish the pause and resume buttons once I have figured out how to get them working in LinuxCNC.

pblackburn

Wed 23 December 2015 14:26

Great job so far David

Robert M

Mon 28 December 2015 08:13

Welcome aboard @_# !!

Andrew_standen

Fri 05 February 2016 11:28

Congratulations David. Now you can make dust... lots of it
Cheers
Andrew

All times are GMT -6. The time now is 02:41.