New Member, Need Help
Hello all, I am new to the whole DIY CNC thing, having found it three days ago. I design custom doors, furniture, architectural elements like wall paneling, etc...but due to the high charges to have this work done I need to do this on my own.
I'm liking what I see and I am shopping around but need to have a Fourth Axis for table legs, etc. What do I need to do, buy, know, etc...Would I be able to use the 4 Axis Combo with the kit? Also, what is the accuracy of these machines, i.e. thousandths, hundreds, etc? Material being cut is alder, oak, MDF, inch thick acrylic, thin aluminum (1/8) engraving in all above. I appreciate all assistance. Thanks. |
Best way to get familiar is to read some of the build threads of the completed
machines. This will give you a sense of what is involved in the build and what can be cut on the machine. |
I agree with Heath. Every question you posed has been answered in abundance in the forum.by reading and researching you will gain a greater depth of understanding than could be given in this thread. Welcome aboard and good luck.
|
This site is indexed by google.
A good start would use the search feature here, or use "4th axis", mechmate in google. A lot of relevant threads popped up. |
All times are GMT -6. The time now is 10:23. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.