MechMate CNC Router Forum - Umbilical Plate Purpose/Role

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- 10. Base Table (http://www.mechmate.com/forums/forumdisplay.php?f=27)

- - Umbilical Plate Purpose/Role (http://www.mechmate.com/forums/showthread.php?t=273)

fabrica

Sat 25 November 2006 07:33

Umbilical Plate Purpose/Role

Gerald,What is the purpose of having the Umbilical Plate 10 10 307 D.

Gerald_D

Tue 20 February 2007 02:48

You can see it in this thread now:

http://www.mechmate.com/Forum/messages/3347/3468.jpg

Jay Waters

Tue 20 February 2007 05:14

Gerald, is that your Mechmate compressor? http://www.mechmate.com/Forum/clipart/happy.gif

Gerald_D

Tue 20 February 2007 05:19

Did I forget to tell everyone that we need a huge compressor for the MechMate? http://www.mechmate.com/Forum/clipart/blush.gif

Loren Gameros

Tue 20 February 2007 09:32

I have a smaller compressor (60 gallons, will this work?
What is the huge compressor for?
Does it drive something on the MechMate?

Gerald_D

Tue 20 February 2007 10:17

Relax Loren, you only need the compressor to blow off the dust before taking the photos! http://www.mechmate.com/Forum/clipart/happy.gif

Hugo Carradini

Tue 20 February 2007 12:09

That compressor really makes that picture look impressive and by the way nice sense of humor.

Gerald_D

Tue 20 February 2007 12:20

That Quincy has been used by 3 generations in the family over about 40 years. Probably had 5 oil changes max. and no other attention (except for mandatory pressure vessel inpections). Still runs like a watch.

http://www.mechmate.com/Forum/messages/3347/3471.jpg

All times are GMT -6. The time now is 17:22.