MechMate CNC Router Forum - gauge bar suggestion

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- 10. Base Table (http://www.mechmate.com/forums/forumdisplay.php?f=27)

- - gauge bar suggestion (http://www.mechmate.com/forums/showthread.php?t=1828)

lumberjack_jeff

Tue 16 June 2009 14:12

gauge bar suggestion

10 20 235 shows the clamp strips cut at "Y+450mm".

10 10 300 shows a gauge rod cut at "Y+461mm".

Seems to me that the clamp strips, if cut 11mm longer, would work nicely as gauge rods.

Gerald D

Tue 16 June 2009 21:01

Good thinking.

Robert M

Wed 17 June 2009 05:34

Thanks for the tip...thanks for sharing ;)

All times are GMT -6. The time now is 21:18.