You could always pick up a six axis arm style robot for $8-10k fit a spindle to the payload and bolt it to the garage floor. Just remember to duck when it comes swing your way.
|
1 Attachment(s)
The old robots can't do this, their control boxes (servo motors and his drivers) have very little capacity for large files or g-code. new robots are very expensive, and the work area is reduced or need a very expensive platform with more than 6 axis.
You can put new drivers to an old robot for control this with a new control box but is the same, more than 10K in equipment. The Mechmate chassis and design not is a good idea for a 5 axis machine, because use V wheels and vertical gravity forces, need a lot of modifications for maintain long Z axis in lateral forces. I'm testing now linuxcnc with 5 axis and steppers, seem the latest versions can do 9 axis. Attachment 15130 |
For these about software,
This is an interesting project: https://www.kickstarter.com/projects...is-multi-fabri |
All times are GMT -6. The time now is 06:43. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.