Stepper Motors
 

I have come across some stepper motors in my quest to put together my system, I have way more then I need of them so if any one needs some motors please let me know.

490 oz holding
6 amp
1.8 step
3/8 shaft
NEMA 34
4 wire units
New in box

$40.00 each :)

firechief

Nema 34 and 3/8" shaft don't sound right - the shaft should be 1/2"

Can you get us a part number?

Stepper Motors
 

I have called LIN Engineering and he sent me this sheet on the motors

Part # 8618M-11P-02

Let me know if there is something I need to know, all your help is great.

Thanks
Tim

If I found the correct documentation, the 8618L-11P motors have 2.4mH inductance, so they could be used with power supplies up to about 48VDC. The web site shows that they are round motors, so they are an older design than the square motors most of us use; however, I have some old round Superior Electric motors that have worked very well with Geckodrive stepper drivers.

(I have some older PH299 size 34 motors from Oriental Motor that have a 0.375" shaft. All of my square size 34 motors have 1/2" shafts.)