Is the Main longitudinal beam Taper Flange or Parallel Flange Channel
Hello,
I would like to know if the main longitunal beam taper flange or parallel flange ? Thanks. |
It can really be whatever is available to you as long as it is rigid. Most used a taper flange.
|
|
Taper is technically stronger if the sizes are the same however it adds other items to deal with if you choose to bolt through using a bolt and nut. If you choose to tap the hole it is not an issue, if you don't I recommend using wedge washers as they are made to keep the nut parallel to the surface tension that it applies. I used tapered flange C-channel as well.
|
All times are GMT -6. The time now is 17:47. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.