Chinese Spindle Issue
This is just a heads up to anyone else who comes across this problem. My 3kw air cooled Chinese spindle has run reliably for 3 years until a couple of days ago when in the middle of a rush job it stopped spinning. It was making noise and varying the frequency would alter the noise but the spindle was only making feeble efforts to turn. I was all set to order a new spindle but delivery was going to be about 10 days for a reasonably priced one. I had checked all my wiring for continuity but as a last resort I dismantled the connector on the spindle. It turned out one of the wires had worked loose as they only use screw terminals.
|
Just to add my comment. I changed the connector and found that grounding pin is not connected at all - 3kw air cooled spindle.
Milosh |
All times are GMT -6. The time now is 07:45. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.