Got the Plans, Now What? Freedom, USA
I just purchased the plans for the cnc router looking forward to starting my build. do you have any ideas or suggestions were to start
|
Yep......
going trough...thoroughly the plans....1st :p Then....build it :D |
Go to the intros and tell us a little about yourself and what your proposed uses are, when you have the chance.
Lots of brilliant minds here willing to help out. (and me...:) ) |
Read , read , read the build threads...
I also suggest you read as much as possible the build threads. :) Oh and start buying parts from me! :) |
If there is one thing I can suggest is read and re-read the plans noting every little thing you can find. I know from my build that I didn't read them well enough and it has come back to bite me in the bum, requiring me to do things over and to regret doing other things. If you do that plus read as many build threads that you can you will be well along the way of a successful build.
|
Short Answer, Read.....
|
All times are GMT -6. The time now is 08:23. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.