MechMate CNC Router Forum - Help choosing a controller for a Pilot Pro router

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- 70. Control Systems (http://www.mechmate.com/forums/forumdisplay.php?f=28)

- - Help choosing a controller for a Pilot Pro router (http://www.mechmate.com/forums/showthread.php?t=2190)

space cadet

Sat 10 October 2009 19:51

Help choosing a controller for a Pilot Pro router

hello, before I had found this site, I purchased a Pilot Pro dual drive router with limit switches. Unfortunately, the seller has never sent the controller, and will not answer my emails/calls/etc.

Is anybody familiar with this unit, and which controller would you recommend for use with this router? What all do I need for a "turn-key" solution?

thanks!

sailfl

Sun 11 October 2009 02:01

Space Cadet,

This forum is set up for people that are building MechMates. If you would like to build a MM, we can help you. You will have more success at CNCZONE.com.

Good luck.

chopper

Sun 11 October 2009 11:35

Quote:

Originally Posted by space cadet

you could try to talk to Tom @ candcnc he will be able to help you get what you need, good luck
//chopper

All times are GMT -6. The time now is 11:57.