Done..
 

Got my Vinyl letters.. Now it looks like something..

3-D Sign Hot off the press, Made out of Blue extruded foam

Sign details
 

Wayne,

I just used what I had in the cupboard.. I used some Kilz primer sealer 3 coats so I could sand flaws, then I used some Painters Touch acrylic/latex (Green), the for the gold I used acrylic/latex that my sons and I bought at Micheals for anouther project, then topped it all off with a couple coats of clear.

Here's a tip - when doing a foam sign don't let anyone near it untill you have a hard coat on it.. you can see a couple of finger dents on my sign because the boys and the neighbors had to test it to see if it was actually foam..

What did you use to paint the foam with? Anything in particular?

Jack,
Take a look at the post copied from Rene's personal thread for the paint info.