| vishnu |
Sun 09 August 2009 11:55 |
First Commercial Order
2 Attachment(s)
I have been off the MM forum for quite a some time. I had my first order today for 3 Mirror frames cut from 4' x 2' MDF 16 mm thick. I was fun doing today after a faulty wire stopped my machine for over 2 hours in between. The total design was V carved with 90 deg V tool at 70 IPM feed rate.
I will be cutting the Mechmate Name plate on Wood tommorow to grab the Sl.# 30 .. hope its available. But man working with Artcam is really like starting from Kindergarden to Phd :confused: looks like my brain has be sharped.
Mechmate is Neighbours envy and a owners pride.:)
|
