MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Dxf Library (http://www.mechmate.com/forums/forumdisplay.php?f=71)
-   -   Folding Picnic/Lounge/Beach Chair (http://www.mechmate.com/forums/showthread.php?t=4887)

st_indigo Tue 10 February 2015 20:56

Folding Picnic/Lounge/Beach Chair
 
Parts for five chairs from one sheet of 48x96x3/4 inch hardwood plywood with a 1/4 inch end mill.

Pockets on the four side parts should be milled 3/8" deep.

All edges on milled parts must be manually rounded on the router table with a 1/4" roundover bit before assembly, so there will be no need to use "dogbones" on the pockets.

You can, of course, modify these directions to suit your own assembly preferences.

Enjoy!
Philip

https://farm8.staticflickr.com/7411/...ea727c02_o.jpg

st_indigo Tue 10 February 2015 20:58

ALSO - the holes for the bolts are sized at 1/4" diameter and are meant as placeholders only. Drill them out to your desired size before assembly.

colorado1 Thu 11 June 2015 16:03

Where is the file?

darren salyer Thu 11 June 2015 21:29

Nice first post Eric. Welcome aboard.

asselin22 Mon 21 March 2016 07:07

there is no file :(


All times are GMT -6. The time now is 13:41.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.