mechmate on youtube
who here owns this machine. I have a couple of questions. they probably will be answered in the build thread.
https://www.youtube.com/channel/UChr...Zm_scF9Rvb4uOw thank you archie |
That certainly looks like this: http://mechmate.com/forums/showthread.php?p=74881
|
it is i made a bobo
|
It's David's machine (sphericos) machine : http://mechmate.com/forums/showthread.php?t=5496
|
One "simple" advice that pop to my eye & mind looking at your nice new machine set up !! ...."gotta" cap those open holes on all steppers, most simply just add tape !
I used simple alu foll type duck tape. With what ever u-use, make sure you close them before dust....spooks in and make you go nuts at trying to figure & understand why thing aren't longer going as planed :eek::confused: |
there is not much descriptions in that tread .... what are your questions ? I think many can answer it here ...
|
the polished rails.... there must not be any moisture in his shop
archie |
:-) very shining ... looks like transparent enamel .... but I think he is the only one who can answer that question ...
|
Nothing special done just burnished with a wire brush on a cordless drill. Despite not being a totally dry environment it seems to have survived quite well. My shed does have a few damp issues due to poor drainage, when it's really wet the water comes up through the floor. The previous owner of my house, who built it, was not famed for the quality of his work. One of the jobs I have planned for this summer is digging a gully down the side of the house to take the excess water from the fields behind my house down to the main drainage at the front faster. In the meantime I mitigate things by making sure that there is good airflow through the building this stops thins corroding.
|
All times are GMT -6. The time now is 01:06. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.